Keywords: Category: Scope:  
Your present location:Home >> Fitness >> Treadmill Measurements During the Validation Study

Font Size:big  middle  small

Treadmill Measurements During the Validation Study

Writer:realleaderfitnessDate:2017-2-20 08:51:42
In this study, an instrumented treadmill with a running surface of 1.60m by 0.60m that was driven by a 1.8 kW motor was used to measure vertical GRFs during running. The treadmill was equipped with three strain gage force transducers which were connected to bridge amplifiers. The force transducers were mounted on a stiff plate which was enforced with a non-deformable frame and were positioned as shown in Figure 2. The signals from the amplifiers were sampled at 1000 Hz, digitized into a 16-bit signal by an AD converter and were connected to a computer.
This entry was posted on February 20, 2017 Fitness